Baglem® light led aviation obstruction lights are lighting devices approved According to the requirements established by ICAO and FAA. The same regulations establish that any facility that may be a danger for air traffic like buildings, pylons, towers, lighting towers, structures for broadcasting radio and television, chimneys, wind generators; Should be provided with signal system to avoid the risk of collision. The low intensity Baglem® lamps are used for night signaling and emit a light beam with angle of irradiation of 360° typically in aeronautical Red color. The light is fixed but if necessary It can be intermittent with a flashrate of 60 per minute or a different frequency on request. Baglem® uses LED Technology that has several advantages as energy saving, low environmental impact and allows to avoid the typical overheating problem and has a long life because LEDs don’t burn at all but tend to lose intensity in time. The circuit board made up of 6 LEDs with 3 circuit avoids the risk, in case of failure, of one led to be without signaling. Baglem® light led has more patented solutions and our technicians give full support on regulations and products configuration.

SINGLE-bodied Low Intensity 12/24/48Vdc/32cd

Product Technical Sheet

Product characteristics

  • TypeLow intensity
  • SeriesAOL
  • Brand Baglem® Light Led
  • Led suppli circuits3 circuits
  • N. of leds6 Led Smd
  • Light sourceLed Smd
  • Light beamStabilized
  • Light intensity> 32cd
  • Light colorAeronautical Red
  • Led lifespan100.000 h
  • Flash frequency20 ~ 60 fpm (optional)
  • Weight0,8 KG (+/- 10%)
  • Height70 mm (+/- 10%)
  • Depth100 mm (+/- 10%)
  • Lens materialUV resistant polycarbonate
  • Lamp materialSelf-extinguishing
  • Body-base materialRed coloured aluminium (RAL 3020)
  • Heat dispersionnatural integrated
  • Wind speed120 km/h
  • Guaranteenon-opening body (blocked)
  • Degree of protectionIP 65

Power supply

  • Voltage (Volts)12 VDC
  • Operating lamp power Watts2 W

Installation and storage

  • Top fixingthread 3\4 NPT-F
  • Pole fixingmax > ø 40 mm
  • Permanent fixingFischer 8 mm
  • Operating temperature-20°C ~ +55°C
  • Storage temperature-40°C ~ +85°C

Reference standars

ICAO Annex 14

*Pictures and photos on this site could not represents exactly the actual product delivered to the customer

Installation and product features

Installation on request

  • Directly on pole\ single lamp thread 3\4.
  • Supplied with stainless steel clamp for fixing on pole or wall.
  • Supplied with branch box for fixing on pole or wall.
  • Supplied with branch box for fixing to the ground
  • Custom installation.
Contact us

Advantages and features

From over 40 years Baglem® Light Led presents innovative and high quality products for aviation obstruction light signaling.
Check all Baglem® Light Led features

Command and control equipment

The framework autonomously manages the whole system thanks to the integrated software that allows him to assess the number of lamps connected.
Command and control equipment