The double Baglem® light led obstacle to flight warning light designed according to ICAO Low Intensity Type A.
It is used for night signaling as specified by the ICAO Annex 14 regulations to warn of the presence of obstacles up to 45 meters in height that could be a danger to air traffic:
buildings, pylons, towers, light towers, structures for radio and television transmissions, chimneys, tanks, wind generators.
The Baglem® Light Led ICAO Low Intensity Obstruction Light Type A emits a steady red light with a horizontal beam of 360 ° and vertical> 10 °.
The patented vertical modular system, thanks to the superimposed mechanics, guarantees the photometric and redundancy compliance required by the ICAO Low Intensity Type A standards.

The command and control technology Baglem® light led allows you to take advantage of two types of redundancy:

"In standby", when only one of the lights in redundancy (called "primary" or "master") is operating, while the other (called "secondary" or "slave") is activated only in the event of failure of the "primary" light or master "

"active", when all the redundant lights work together, but each of them is able to perform the function by itself in case of failure of the other.

The product can offer features such as fault monitoring and built-in photocell (on request). It can be connected to the AOLPANELS command and control panel.

Our technicians provide advice on regulations and product configurations, including customized ones.

Double body, low intensity 10 cd Type A / 12/24/48 Vdc =

Product Technical Sheet

Product characteristics

  • TypeLow intensity TYPE A
  • SeriesAOL
  • Brand Baglem® Light Led
  • Light sourceLed Smd
  • Light beamVertical between 2°and 10° - Horizontal 360°
  • Light intensity> 10cd
  • Light colorAeronautical Red
  • Led lifespan100.000 + 100.000 h
  • Weight1,8 Kg (+/- 10%)
  • Height135 mm (+/- 10%)
  • Depth100 mm (+/- 10%)
  • Lens materialUV resistant polycarbonate
  • Lamp materialSelf-extinguishing
  • Body-base materialRed coloured aluminium (RAL 3020)
  • Heat dispersionnatural integrated
  • Guaranteenon-opening body (blocked)
  • Degree of protectionIP 65

Power supply

  • Voltage (Volts)12 / 24 / 48 Vdc =
  • Operating lamp power Watts1,8 W
  • Emergency lamp power Watts1,8 W

Installation and storage

  • Top fixingthread 3\4 NPT-F
  • Pole fixingmax > ø 40 mm
  • Permanent fixing2 x Fischer 8 mm
  • Operating temperature-20°C ~ +55°C
  • Storage temperature-40°C ~ +85°C

Reference standars

ICAO Annex 14 - Chapter 6 - Annex 14 - Aerodromes (ICAO International Civil Aviation Organization)

*Pictures and photos on this site could not represents exactly the actual product delivered to the customer

Installation and product features

Installation on request

  • Directly on pole\ single lamp thread 3\4.
  • Supplied with stainless steel clamp for fixing on pole or wall.
  • Supplied with branch box for fixing on pole or wall.
  • Supplied with branch box for fixing to the ground
  • Custom installation.
Contact us

Advantages and features

From over 40 years Baglem® Light Led presents innovative and high quality products for aviation obstruction light signaling.
Check all Baglem® Light Led features

Command and control equipment

The framework autonomously manages the whole system thanks to the integrated software that allows him to assess the number of lamps connected.
Command and control equipment